A dual-mode strategy based on ß-galactosidase and target-induced DNA polymerase protection for transcription factor detection using colorimetry and a glucose meter.

In this work, we report a novel dual-mode method for the highly specific and sensitive detection of transcription factors (TFs) via the integration of Klenow polymerase protection induced by target-specific recognition, cascade-signal amplification using the hybridization chain reaction (HCR) and CRISPR/Cas12a system, and dual-signal transduction mediated by ß-galactosidase (ß-gal) and two substrates. A dual-mode signal-sensing interface was constructed by immobilizing the oligo DNA probe (P1) tethered ß-gal in a 96-well plate. A hairpin H1 with the ability to initiate HCRs was designed to contain the TF binding site. The binding between the TF and H1 protected the H1 from being extended by the Klenow fragment. After thermal denaturation, the reserved H1 launched the HCR and the HCR products activated CRISPR/Cas12a to cleave P1 and reduce the ß-gal on the sensing interface, and thus the contents of the TFs and the corresponding signals mediated by the catalysis of ß-gal showed a correlation. This work was the first attempt at utilizing ß-gal for dual-signal transduction. It is a pioneering study to utilize the HCR-CRISPR/Cas12a system for dual-mode TF sensors. It revealed that DNA polymerase protection through the binding of TF and DNA could be applied as a new pattern to develop TF sensors.

3-(2,2,2-Trifluoroethoxy)propionitrile-based electrolytes for high energy density lithium metal batteries.

In this study, 3-(2,2,2-trifluoroethoxy)-propionitrile (FEON), a fluorinated nitrile compound with high oxidative stability, low volatility and non-flammability, is introduced as an electrolyte solvent for high-energy density Li|NCM batteries. After optimization of the electrolyte as (0.8 M LiTFSI + 0.2 M LiODFB)/FEC : FEON (1 : 3, by vol., abbreviated as FF13), the FEON-based electrolyte exhibits better cycling performance for both the lithium metal anode and 4.4 V high-voltage NCM cathode, compared with those of a commercial carbonate electrolyte of 1 M LiPF6/EC : EMC : DMC (1 : 1 : 1, by vol.). As for the FF13 electrolyte, the maximum coordination number of 3 for FEON molecules in the solvation structure is disclosed through molecular dynamics simulation combined with Fourier transform infrared spectroscopy and nuclear magnetic resonance spectroscopy measurements. Furthermore, the solid electrolyte interphase on the lithium metal anode is enriched with organic components and LiF, which is proposed from FEON decomposition based on density functional theory calculations and X-ray photoelectron spectroscopy analysis. All the above results demonstrate that fluorinated nitrile electrolytes constitute a promising platform for high energy density Li|NCM batteries.

Dual-mode photoelectrochemical/electrochemical sensor based on Z-scheme AgBr/AgI-Ag-CNTs and aptamer structure switch for the determination of kanamycin.

A "signal-on" dual-mode aptasensor based on photoelectrochemical (PEC) and electrochemical (EC) signals was established for kanamycin (Kana) assay by using a novel Z-scheme AgBr/AgI-Ag-CNTs composite as sensing platform, an aptamer structure switch, and K3[Fe(CN)6] as photoelectron acceptor and electrochemical signal indicator. The aptamer structure switch was designed to obtain a "signal-off" state, which included an extended Kana aptamer (APT), one immobilized probe (P1), and one blocking probe (P2) covalently linked with graphdiyne oxide (GDYO) nanosheets. P1, P2, and aptamer formed the double helix structure, which resulted in the inhibited photocurrent intensity because of the weak conductivity of double helix layer and serious electrostatic repulsion of GDYO towards K3[Fe(CN)6]. In the presence of Kana, APT specifically bound to the target and dissociated from P1 and P2, and thus, a "signal-on" state was initiated by releasing P2-GDYO from the platform. Based on the sensing platform and the aptamer structure switch, the dual-mode aptasensor realized the linear determination ranges of 1.0 pM-2.0 µM with a detection limit (LOD) of 0.4 pM (for PEC method) and 10 pM-5.0 µM with a LOD of 5 pM (for EC method). The aptasensor displayed good application potential for Kana test in real samples.

Tunable graphdiyne for DNA surface adsorption: affinities, displacement, and applications for fluorescence sensing.

Graphdiyne (GDY) adsorbed DNA probes have been used as a fluorescent sensing platform, but topics including DNA adsorption affinities, DNA probe displacement, and fluorescence quenching ability were rarely researched. Herein, the adsorption affinity of single-stranded DNA (ssDNA) and double-stranded DNA (dsDNA) on a tremella-like GDY was tuned by modulating the surface chemistry of GDY. The fluorescence quenching ability of GDY with different oxidation degrees was compared. The nonspecific displacement of DNA probes on GDY was studied. Under the same concentrations, GDY with low oxidation degree exhibited stronger adsorption affinity and higher adsorption capacity to both ssDNA and dsDNA than highly oxidized GDY. DNA adsorbed on low-oxidized GDY was more resistant to displacement by other DNAs. Protein showed strong interaction with different GDY and could displace DNA probes on GDY. Based on these findings, an ideal GDY with proper oxidation degree, exhibiting high surface affinity for ssDNA and low affinity for dsDNA, was used as scavenger of redundant ssDNA fluorescent probe in an enzyme-assisted amplification system for sensitive ochratoxin (OTA) detection. This study has enhanced our fundamental understanding of DNA adsorption by GDY. It also provided a rational way to apply GDY for fluorescence sensing in a complicated system.

Visual Quantitative Detection of Glutathione and Cholesterol in Human Blood Based on the Thiol-Ene Click Reaction-Triggered Wettability Change of the Interface.

Herein, we proposed an innovative visual quantitative sensing strategy based on thiol-ene click chemistry and the capillary action principle. A triethoxyvinylsilane (VTEO)- or mercaptopropylsilatrane (MPS)-modified interface was prepared for analyte recognition. Target analyte molecules containing thiol groups or C═C double bonds are coupled to the VTEO- or MPS-modified inner surface of the glass capillary tube via a thiol-ene click reaction, respectively. Then, the molecular recognition events were transformed into the wettability change of the inner wall of the glass capillary. The concentration of the target molecules was quantified by reading the height change of the water column in the capillary tube. As a proof of concept, this strategy was successfully used to build visual quantitative sensors for detecting glutathione and cholesterol. In addition, this strategy showed a good anti-interference ability to complex biological fluids and realized sensitive glutathione (GSH) and cholesterol detection in real human blood samples.

A cathode photoelectrochemical assay of terminal deoxynucleotidyl transferase activity based on Ag-AgI-CNTs composite and surface multisite strand displacement amplification.

Photocathode-based assay is anti-interference for real sample detection. Photocathode produces low photocurrent signal and gives rise to poor sensitivity. Herein, a novel cathode photoelectrochemical (CPEC) sensing platform based on Ag-AgI-CNTs as photocathode material and K3[Fe(CN)6] as photoelectron acceptor was established. Since [Fe(CN)6]3- effectively accepted photoelectrons from Ag-AgI-CNTs, it greatly enhanced the CPEC response. Combining a surface multisite strand displacement amplification (SMSDA) strategy, the CPEC platform was applied for the activity assay of terminal deoxynucleotidyl transferase (TdT). In this proposal, oligo dT primer tethered on CPEC platform was in-situ extended to generate a polyA tail. Then the polyA tail formed a stable multi-point hybrid structure with the adjacent oligo dT. After launching the SMSDA, the CPEC platform was covered by more elongated polynucleotide chains and network, which acutely hampered the photoelectron transfer (eT) between photocathode and electron acceptor and caused a reduced photocurrent. The CPEC sensor possessed a satisfactory linear response from 6 × 10-5-0.1 U and a low detection limit of 1.1 × 10-5 U. The strategy offered a more specific and sensitive method for TdT activity assay. It was feasible in the field of TdT-based biochemical research, drug screening, and disease diagnosis.

Self-neutralizing in situ acidic CO2/H2O system for aerobic oxidation of alcohols catalyzed by TEMPO functionalized imidazolium salt/NaNO2.

A reversible in situ acidic catalytic system comprising recyclable TEMPO functionalized imidazolium salt ([Imim-TEMPO][Cl])/NaNO(2)/CO(2)/H(2)O was developed for selective transformation of a series of aliphatic, allylic, heterocyclic, and benzylic alcohols to the respective carbonyl compounds. Notably, the system avoids any conventional acid and can eliminate unwanted byproducts, facilitate reaction, ease separation of the catalyst and product, and also provide a safe environment for oxidation involving oxygen gas.